After Care Instructions

Our high quality products are strong enough to stand up to almost anything but we have a few tips to keep them looking great!

WINDOW TINT

• Leave windows up for 2-3 days in hot weather or 3-5 days in cold weather.

• Since tint is applied wet - haziness and water bubbles are normal. Do not try to squeegee, push or flatten any bubbles. They will evaporate over 2 weeks.

• Avoid cleaning or pressing on window tint for at least a week.

• Use cleaners that are free from ammonia or vinegar (no Windex).

• Stickers, Velcro, suction cups, etc. may be applied after 2 weeks, however please note these may damage film when removed. 

CERAMIC COATING

• Initial cure time of 3 hours has been completed in our shop. Your car is safe to drive and get rained on.

• Do not wash with soap or chemicals for 5 days after the coating has been applied.

• Avoid using automatic car washes as the acidic soaps will wear away the coating.

• Remove bird dropping and other debris ASAP to avoid damage to the coating.

• We recommend using microfiber mitts and towels with a low ph soap to clean your vehicle.

• We use Adam’s Car Care products

VINYL AND PAINT PROTECTION FILM

• Do NOT wash for 72 hours after application.

• Wash whenever your vehicle appears dirty using a soft microfiber cloth.We recommend using a low ph soap to clean your vehicle.

• We use Adam’s Car Care products

• Automated touchless car washes can be used, but hand washing is best.

• When pressure washing:

• Make sure water pressure is below 2000 psi

• Use a nozzle with a wide angle spray

• Stay at least 1 foot away and do not apply direct or prolonged pressure to any one area, especially around the edges